Now you have a choice when selecting a walk-behind aerator!
The traditional aerators from the major name manufacturers have been hard to control, tiring to operate, complex machines with rotating sheet metal spoons. Plugr offers an alternative that is safer to operate, maneuvers with relative ease, has 50% fewer components and increases productivity on typical residential and commercial applications. Plugr’s unique cam powered design punches cleaner, deeper holes in tough soil conditions and is easy to maintain, reducing costly downtime. No messy water ballast or heavy add-on extra weights either! It’s time to break with tradition and investigate the advantages of Plugr.

Superior Maneuverability
A wide, stable wheel base and start, stop, backup and 90º turn capabilities allow Plugr to aerate around landscape features with ease. This enables aeration in areas hard to reach with other machines.

Safer Operation
Better machine control translates into improved safety. Even a homeowner can keep a Plugr from becoming a runaway in tight spots, on hills and along landscape walls.

More and Deeper Holes
Because Plugr relies on the power generated by the camshaft design and engine to drive tines deep into the soil, it will out-perform other rotating tine machines in most tough soil conditions. The hole spacing is closer than all comparable competing brands.

Easy Transport
Since it relies on power, not weight, Plugr has a low weight to aeration width ratio with no add-on weights or water drums to mess with. With the handle folded, the Plugr PL410 and PL400 can fit in a car, SUV or minivan for homeowner rental convenience. Once on the ground, Plugr rolls easily with the engine on or off. PL850 drives up and down trailer ramps with ease.

Superior Tines
Instead of typical formed sheet metal “spoons” found on most aerators, Plugr uses solid high carbon steel bar stock that has been machined and heat treated. This process, along with the straight up and down action of Plugr cams, reduces side load and breakage common with rotating tine machines. Plugr has just 4, 6 or 8 tines to maintain compared to 24 or more on other popular brands.

Quick, Low Cost Maintenance
Just release the hold downs and lift the cover for 100% access to all components. Plugr has up to 50% fewer parts to maintain. No messy chains, no complex tine removal and replacement. Applying grease to fittings every 10 hours of operation is about all you will need to do to keep your Plugr performing.

Less Down Time
Plugr is designed to be simple to maintain but when parts are required, they are no more than a phone call away. Access to factory part inventories supplements distributor and dealer availability so you will never be down due to hard-to-get parts.